SPA MODEL
CIARA 
Slip into the Ciara and you will find total relaxation. The Ciara offers many different seating areas all ergonomically designed to provide maximum hydrotherapy to all parts of the body. Beautiful as it is versatile, the Ciara can fit through a 36” standard door allowing for easy installation in sunrooms, basements or screened porches without costly removal of doors, windows or walls.
Optional Features
- Bluetooth Stereo System
- UV Ultraviolet sanitation system
Dimensions and Weights
- 82in. x 77.5in. x 35in. (H)
- 208cm x 197cm x 89cm (H)
- Empty: 725Lbs. / 330Kgs.
- Fill Weight: 3230Lbs. / 1468Kgs.
- 300 gallons / 1,136 liters
Wiring Requirements
- 50 amp 220 breaker in main panel
- 50 amp 220 gfci in outside disconnect
- All wire 6/3 with ground {4 wires}
Standard Features
Recommended seating capacity of the spa.
Number of actual adjustable hydrotherapy in the spa.
This is our standard 11 amp booster pump.
Simple, durable and lost lasting controls all with 5.5 kw heaters and backlit icons and screen for easy use at night.
Our spas all come standard with an Ozone unit which disperses O3 gas through the spa. This gas helps oxidize the water keeping it clear and healthy.
Front load cartridge filtration system easily accessible for cleaning and replacement.
High grade stainless-steel jets are adjustable by turning the face to create the perfect amount of pressure.
Long lasting LED bulbs provide vibrant color with 7 different color settings.
These adjustable lighted waterfalls add a soothing ambience to your spa.
These lights are located all around the perimeter of spa and correspond with the main light.
Our spa shells are made with ABS backed acrylic sheet. This material is thicker and more vibrant than most acrylic used in the industry.
Our spa frames are made from G90 galvanized steel. They are lighter, stronger and more durable than the wood frames found on most spas.
We spray 2lb density foam on our spas for added insulation and to properly secure water lines.
Our panels are constructed out of a high-grade composite then wrapped in a decorative heat transfer coating adding a sleek design and providing UV protection. These panels are then backed with 1” foam and wrapped with an aluminum barrier for superior heat retention in the spa.
We use a solid ABS pan on the bottom of our spas. These pans will not rot and provide added structural support for the frame. These pans seal the bottom of the spa resisting water and rodents from entering inside the cabinet of the spa.
Our covers are a thick 5” to 3” 2lb. foam density cover. A quality cover greatly reduces energy costs.
Our spas are equipped with an external drain that easily attaches to your garden hose for hassle free draining of the unit.
Our spas have been tested and passed the California Energy guidelines for energy consumption.
spa model
CIARA
Standard Features
Slip into the Ciara and you will find total relaxation. The Ciara offers many different seating areas all ergonomically designed to provide maximum hydrotherapy to all parts of the body. Beautiful as it is versatile, the Ciara can fit through a 36” standard door allowing for easy installation in sunrooms, basements or screened porches without costly removal of doors, windows or walls.
Optional Features
- Bluetooth Stereo System
- UV Ultraviolet sanitation system
Dimensions and Weights
- 82in. x 77.5in. x 35in. (H)
- 208cm x 197cm x 89cm (H)
- Empty: 725Lbs. / 330Kgs.
- Fill Weight: 3230Lbs. / 1468Kgs.
- 300 gallons / 1,136 liters
Wiring Requirements
- 50 amp 220 breaker in main panel
- 50 amp 220 gfci in outside disconnect
- All wire 6/3 with ground {4 wires}
Recommended seating capacity of the spa.
Number of actual adjustable hydrotherapy in the spa.
This is our standard 11 amp booster pump.
Simple, durable and lost lasting controls all with 5.5 kw heaters and backlit icons and screen for easy use at night.
Our spas all come standard with an Ozone unit which disperses O3 gas through the spa. This gas helps oxidize the water keeping it clear and healthy.
Front load cartridge filtration system easily accessible for cleaning and replacement.
High grade stainless-steel jets are adjustable by turning the face to create the perfect amount of pressure.
Long lasting LED bulbs provide vibrant color with 7 different color settings.
These adjustable lighted waterfalls add a soothing ambience to your spa.
These lights are located all around the perimeter of spa and correspond with the main light.
Our spa shells are made with ABS backed acrylic sheet. This material is thicker and more vibrant than most acrylic used in the industry.
Our spa frames are made from G90 galvanized steel. They are lighter, stronger and more durable than the wood frames found on most spas.
We spray 2lb density foam on our spas for added insulation and to properly secure water lines.
Our panels are constructed out of a high-grade composite then wrapped in a decorative heat transfer coating adding a sleek design and providing UV protection. These panels are then backed with 1” foam and wrapped with an aluminum barrier for superior heat retention in the spa.
We use a solid ABS pan on the bottom of our spas. These pans will not rot and provide added structural support for the frame. These pans seal the bottom of the spa resisting water and rodents from entering inside the cabinet of the spa.
Our covers are a thick 5” to 3” 2lb. foam density cover. A quality cover greatly reduces energy costs.
Our spas are equipped with an external drain that easily attaches to your garden hose for hassle free draining of the unit.
Our spas have been tested and passed the California Energy guidelines for energy consumption.
CONTACT US
Send E-mail
Phone: 706.991.5156
937 Greensboro Rd
Eatonton, GA 31024
© 2024 OCONEE LEISURE.
STORE HOURS
Tuesday - Saturday: 10AM - 6PM
Monday - Sunday: Closed
CONTACT US
Send E-mail
Phone: 706.991.5156
937 Greensboro Rd
Eatonton, GA 31024
FOLLOW US
© 2024 OCONEE LEISURE.